Tech Support/Contact | FAQ
Purchase iSailGPS

Waypoints, Tracks and Routes on NZ Nautical Charts for your iPhone® and iPad®, even with no cell network signal

iSailGPS NZ Help

These instructions are available within the App by tapping               

To use most features of iSailGPS NZ, Location Services in the Settings app must be ON.

My Location Screen:


Tapping this tab shows the main screen where you will view your current location on a chart. The other 4 tabs at the bottom let you create, download, select, and manage other items to show on this main screen, and to start & stop track recording and navigation.

ACTIONRESULT
Tap the My Location tab
when already on the
My Location screen

Show (or download) a chart for the current location.

Turn on Automatic Current Location Centering.
1 finger slide Drag chart. Turns off Automatic Current Location Centering.
2 finger pinch

Zoom in or out.*

Turns off Automatic Current Location Centering.
2 taps in white space Show (or download and show) chart for tapped position.
2 taps inside main chart Zoom in 2X.
2 taps inside stitched chart If a specific chart is choosen:  Make tapped chart choosen.
else (chart for current location):  Zoom in 2X.
3 taps inside chart Return to original scale.
4 taps Zoom out to see the entire chart.
5 taps        Total Reset

Show chart for current location at its original scale.

Turn on Automatic Current Location Centering.
1 tap with three fingers Zoom out 2X.
Tap    Add a new waypoint for where you are
or any place on a chart you are viewing.                               or

Share a location or a chart image via AirDrop, Copy, Print, Photos app, Email, or Message.              or

Show (or download & show) a chart with a different scale
for the marked point.                                                             or

Show Sun and Moon Azimuth-Elevation sky graph,
and Rise & Set times for your current location.

Tap   
then tap
 Anywhere on the Chart

Read the location coordinates for any point on the chart.

Measure the distance and direction between any two points on the chart.

Select a waypoint on the chart to Edit or Go To or Move.

Get driving directions to any point on the screen.

Get the Weather report for the area shown on the screen.

Push and Hold

  
MOB (Man Overboard)

Create an instant new waypoint for your current location,
and start navigation to it as the Go To waypoint.

Named with the current date & time.

Automatic Current-Location Centering:

On    

Current location is kept centered on the screen.

Switches charts while sailing.
Off     Chart position stays fixed where you move it manually.
To turn On Tap the My Location tab while the chart is showing.
To turn Off Drag the chart.

Display of your current location requires a GPS chip found in all iOS devices that have the ability to connect to a cellular network, or an iOS-compatible external GPS receiver.

Usual Top of the My Location Screen

Stopped or at very slow speeds

Change the units displayed
(e.g. degrees, TM2000)
by using the Settings app.




At faster speeds


When a Go To Waypoint is Set
Swipe left and right on the bar
to switch between location and
navigation information.


Navigating a Route

Swipe left and right on the bar
to switch between location,
navigation to the next waypoint, and
navigation to the final destination.




The Cross Track Error is only shown
when navigating a leg of a route
between waypoints.


The Distance, BRG, VMG and XTE
are along the route, not for a straight
line between the current location
and the final destination.


The ETA shows the time in the current time zone even if the destination is in another time zone. The background color of the Estimated Time of Arrival changes according to the sun's position to warn you if you will be arriving after the sun sets at your destination.

Daytime:     3:41 PM  ETA   Twilight:     7:19 PM  ETA   Dark:     9:56 PM  ETA  

When the Location Accuracy text turns red with a yellow background, this indicates that the GPS satellite signals are not being received properly. Therefore your position may be off. Poor reception may also cause high errors in speed and course measurements.

The GPS-measured course accuracy gets better at higher speeds. When nearly stopped, the course direction is undefined.

 056 ±37°  HDG 

When the Heading Accuracy text turns red, recalibrate the internal compass to improve the heading accuracy. Imagine arrows sticking out of all 4 sides and the front and back of your device. Rotate the device in several different ways so that each of the 6 arrows will at some time be aimed at every area on an imaginary sphere surrounding you. If this does not improve the estimated error, then move farther away from all other electrical devices and metal, and repeat. The actual heading error will be greater than the displayed heading accuracy if your device is near magnetic material such as steel, or your device is not aligned with the boat centerline.

In the Chart Area

The direction of the Course Indicator shows Course Over Ground (COG). The length of the Course Indicator is proportional to the square root of Speed Over Ground (SOG).

At very slow speeds, a gray Compass Heading Indicator is shown instead of the blue Course Indicator, because GPS Course measurements are not accurate at very slow speeds. The displayed Heading Indicator will only be correct if the internal compass is calibrated and your iOS device is physically aligned with the boat and away from magnetic materials.

If the Compass Heading is incorrect or shows a large ± error, go through the normal compass calibration movements even if you don’t see the prompt to do so.

Chart Stitching

The option to stitch adjacent Mercator charts together is selected using the Settings App.
Chart stitching is OFF by default.

Stitch Charts OFFStitch Charts ON
Only one chart is shown. Multiple charts are shown.
Chart margins are shown. Chart margins are hidden.
Fastest chart display. Slower when multiple charts are on screen.

Zoom in to speed up.

Tab Bar Icon Tab Bar Icon

When two adjacent charts partially overlap or you see  Selected chart (✓) is offscreen , to bring the back chart to the front, double-tap it to select it, or tap its name on the Chart List screen.

Only charts which use the same map projection will stitch together. Most NZ Marine charts use the Mercator map projection. Any Mercator chart will stitch to any other Mercator chart that either touches it or overlaps it, as long as the scales of the two charts are not too different. NZ Mariner Transverse Mercator (TM) charts will not stitch.

iSailGPS NZ uses the characteristics of the selected main chart to pick a useful visible grouping. The chart you select is always on top and fully visible. iSailGPS NZ may add charts to and remove charts from the group as you pan around and zoom. If you pan too far away from the selected chart, the other charts will disappear from the screen. So select one of the visible charts by double-tapping it after you pan to a new location.

If you zoom out too far, the display update speed may get very slow. NZ Marine charts are huge images (up to 71 megapixels, 34 x an HDTV picture). Displaying the zoomed-out image of many of these stitched together can take many seconds. We haven’t prevented you from doing this, as sometimes the zoomed-out display can be very useful. But most of the time, keep the zoom level such that you can read the water depth numbers on the charts for quick interactions. If you need more of an overview, select a chart with a larger scale. On older, slower, and smaller RAM memory devices, you may need to turn off Stitch Charts to avoid too-slow display updating and out-of-memory problems with very large charts.

Sharing Locations and Chart Images:

HOW TODO THIS
Email
current location

Tap    , then  Current Location  , then   .

Includes a screen chart image if current location shows on chart.

Email queued in your out box. Sent when the Internet connects.
Send
current location
without a
chart image
Drag the chart so that the current location is not visible
before tapping   , then  Current Location  .
Email
any location
on the chart

Tap    , then  Anywhere on the Chart  .

Move the chart to center the desired point under the red crosshairs.

Tap    , then   .

Includes a screen chart image.

Send
a location
in other
ways

Instead of   , Tap   to use the Messages app.

Tap  Add to Notes. (Not Copy to Notes) to store in Notes.

Tap  Copy Location      coordinates to the clipboard.
Tap , then tap the Google Earth app icon
to view the location in Google Earth.
Send
a screen
chart
image
in other
ways
Tap  Copy Image To  , then
to send the chart image to a nearby AirDrop-capable iOS device or Mac.

Works even at sea with no cell or Internet connection.

Tap  Copy Chart Image     to the clipboard.
Tap  Save Image               to the Photos app.
Save a
screen chart
image in
iCloud Drive
Tap  Save to Files         .

Printing Screen Chart Images:

HOW TODO THIS
Print a screen
chart image with
no crosshairs

Tap    , then  Current Location  .

Tap  Print Chart Image.
Under Printer Options, select your printer.
Tap  Print  .
Print a screen
chart image with
crosshairs
marking the
location

Tap    , then  Anywhere on the Chart  .

Move the chart to center the desired point under the red crosshairs.

Tap    .
Tap  Print Chart Image.
Under Printer Options, select your printer.
Tap  Print  .

Measuring Distance and Direction on the Chart

HOW TODO THIS
View the
distance &
direction from
the current
location to
anywhere
on the chart

Tap    .

Tap  Anywhere on the Chart  .

Move the chart to center the point under the red crosshairs.

Read the distance and direction to it.

Tap   , then  Cancel  when you are done.
View the
distance &
direction
between
2 points
anywhere
on the chart

Tap    .

Tap  Anywhere on theChart  .

Move the chart to center the 1st point under the red crosshairs.

Tap    .

Tap  Measure Distance           .

Move the chart to center the 2nd point under the red crosshairs.

Read the distance and direction.

Tap    when you are done.

Switch to a Chart with a Different Scale

HOW TODO THIS
Show (or
Download
and Show)
a chart with a
different level
of detail and
a different
amount of
area covered
for Anywhere
on the Chart

Tap    .

Tap  Anywhere on the Chart  .

Move the chart to center the point you want to see on the new chart under the red crosshairs.

Tap    .



.          

Tap  New Chart
        New Scale

Tap the  Scale  button for the chart scale that you want.

Tap  Get NZ Marine Chart  .

(This new chart will show as the one selected on the Chart List screen.)

If the chart has already been downloaded, it will appear immediately, centered on your chosen point. If not, it will download and then appear.
Show (or
Download
and Show)
a chart with a
different level
of detail and
a different
amount of
area covered
for your
Current
Location

Tap    .

Tap  Current Location  .



.          

Tap  New Chart
        New Scale

Tap the  Scale  button for the chart scale that you want.

(If you choose one of the left two scales, the new chart scale that you choose will show as either the Most Detail scale or the More Area scale for Current Location selected near the top of the Chart List screen table.)

Tap  Get NZ Marine Chart  .

If the chart has already been downloaded, it will appear immediately, centered on your chosen point. If not, it will download and then appear.

Weather Report and Forecast

HOW TODO THIS
View the weather report
and forecast for
anywhere on the chart

Tap    .

Tap  Anywhere on the Chart  .

Move the chart to center the place under the red crosshairs.

Tap    .

Scroll down the list of actions.

Tap  Weather           .
Update to iOS 16 or later to view weather information.

Sun and Moon Position, Rise & Set Times

HOW TODO THIS
View the Az/El sky graph
with sunrise, sunset,
moonrise & moonset
times, moon phase, and
magnetic declination for
your current location

Tap    .

Tap  Current Location  .

Scroll down the list of actions.Scroll the bottom row of action icons to the left.

Tap  Sun and Moon           .

Tap the date (upper left) to bring up a Date and Time Picker.

Tap Done when you are finished.
View the Az/El sky graph
with sunrise, sunset,
moonrise & moonset
times, and moon phase
for anywhere on
the chart

Tap    .

Tap  Anywhere on the Chart  .

Move the chart to center the place under the red crosshairs.

Tap    .

Scroll down the list of actions.Scroll the bottom row of action icons to the left.

Tap  Sun and Moon           .

Tap the date (upper left) to bring up a Date and Time Picker.

Tap Done when you are finished.

Calculated Rise and Set times are approximate. The exact observed times depend on the relative elevation of the surrounding topography and the temperature of the air in the light path.

Pay attention to the displayed time zone. The displayed time zone is more accurate for some locations when an Internet connection is available. If necessary, correct the times shown to the desired time zone.  DST  means that Daylight Saving Time is known to be in effect for that location on that date.

For the moon illumination percentage, ↑ indicates a waxing phase, and ↓ indicates a waning phase.
Less than 50% indicates a crescent phase, while greater than 50% indicates a gibbous phase.

The magnetic declination is only available for your current location. If you don't see the magnetic declination, then tap Done, perform the compass calibration, and try again.

Decluttering the Chart

  HOW TO  DO THIS
Hide old
track
segments

Tap    .

Hold down the + button on the left  
until only the current track segment is showing.
Hide waypoint
Note text
for all waypoints
Go to the Home screen.

Start the Settings App.

Scroll down to iSailGPS NZ. Tap it.
Tap  Waypoint Notes on Chart     to OFF.
Hide a
single
waypoint

Tap    .

Tap the name of the waypoint.

Tap  Edit  .

Tap   Visible   to OFF.

Tap  Done  .

Hide all
waypoints not
being used for
navigation

Tap    .

Scroll to the bottom of the Waypoints list.

Tap   Show Only Route Waypoints     to ON.

Hide all
routes

Tap    .

Scroll to the top of the Routes list.

Tap   Don't Show Any Route.

Track Screen:


Don’t Record a Track. Stop Recording.

The other 2 choices both turn on Track Recording.

Record a Track only when iSailGPS NZ is the active app and is showing on the screen.
Switch to showing only the current track segment.

Start the Track Timer, Odometer and Average Speed display.

Don't put the iPhone in your pocket without putting it to sleep or turning on the Proximity Sensor in Settings. The inside of your pocket can “tap” on screen buttons causing unwanted behavior.

Record a Track even when using another App or the iOS device is sleeping.

Switch to showing only the current track segment.

Start the Track Timer, Odometer and Average Speed display.

Will keep recording until you manually turn it off.

For a shortcut, if you Push and Hold one of these recording options instead of tapping it, after the selection the screen will immediately jump back to showing the My Location screen.

When set to  Always  , iSailGPS NZ continues to record a track and to drain the battery more quickly for as long as iSailGPS NZ remains in the Recently Used Apps Switcher. The Status Bar in other apps will show that your location is still being recorded by iSailGPS NZ.

Recording of tracks requires a GPS chip found in all iOS devices that have the ability to connect to a cellular network, or an iOS-compatible external GPS receiver.

Using Tracks:

HOW TODO THIS
Save the track
within iSailGPS NZ
If the stepper buttons below the graph are visible, tap them so only the desired track segments are showing.
Tap(Share).  Tap  Track Segments … (or  Entire Track  ).
Tap  Save Track As a Route           .
Save the track
in GPX format to
the Notes app
Tap(Share).  Tap  Track Segments … or  Entire Track  .
Tap    Add to Notes.
View the
track on
a chart
Tap  View On A Chart  .
If no stored chart is available, the chart download screen will appear. If you choose to not download a chart, you will see the track in Don't Show a New Zealand Chart mode.
View the track
in Google Earth

The Google Earth app
must be installed.
Tap(Share).  Tap  Entire Track  or  Track Segments … .

Tap   .   Tap the Google Earth app icon.

Sharing Tracks:

HOW TODO THIS
Email entire track Tap(Share), then  Entire Track , then   .

In GPX format.

Email queued in your out box. Sent when the Internet connects.
Email only
some track
segments
Tap the stepper buttons below the graph so only the desired track segments are showing.
Tap(Share), then  Track Segments … , then   .
Send the
track in
GPX or KML
format to
other apps
or other devices

Use AirDrop

Use Dropbox

Use email (GPX only)

Use Copy to Open In

Use Messages (GPX only)

Use the Mac Finder
(or iTunes)

Save the
track in
GPX or KML
format to
iCloud Drive
Tap(Share) ,  then   Track Segments … or  Entire Track  .
Tap    or    ,  then  .
Tap   for a GPX file,  or  Tap   ,  then .
Add a waypoint
using a point
on the Speed and
Course Graph
With one finger on the graph move the green line to the spot where you want a waypoint. Keep that finger down.
Using a 2nd finger : Tap(Share).
Optionally name your waypoint using letters, numbers & spaces.

Optionally tap the waypoint icon to choose a new icon.

Optionally erase or replace the Note text.

Tap  Add  at the top (or   Add & Go To   at the bottom).

Speed and Course Graph:

HOW TODO THIS
Record an
accurate
speed and
course history
Start iSailGPS NZ with a clear view of the sky.

Tap the My Location tab.

Wait a few minutes to lock on all satellites ( Location Accuracy < 18 m ).

Tap the Track tab. Tap Record Track:  Always . Go!
Tap Record Track:  Off   before you stop iSailGPS NZ at the end of the trip.
View Date &
Time in track
Trace the track on the graph with one finger.
View Average
Speed in track
Trace the track on the graph with two fingers.

Shows average speed between your two fingers. Average does not include times while you are stopped or track recording is Off.

Show or not
show waypoints 
on the speed
graph *
Go to the Home screen.

Start the Settings App.

Scroll down to iSailGPS NZ. Tap it.

Tap  Waypoints on Speed Graph   .

Print the
speed and
course graph
Tap(Share),   then  Speed & Course Graph Image .
Tap  Print Graph Image         .
Under Printer Options, select your printer.
Tap  Print  .
* Waypoints from the main waypoints list which are within about 120 metres of a point on the track are shown.

Sharing the Speed and Course Graph:

HOW TODO THIS
Copy the
graph to the
clipboard
Tap(Share),   then  Speed & Course Graph Image .
Tap  Copy Graph ImageImage to Clipboard             to the clipboard.
Save the
graph to the
Photos app
Tap(Share),   then  Speed & Course Graph Image .
Tap  Save Image in Photos             .
Save the
graph to the
Notes app
Tap(Share),   then  Speed & Course Graph Image .
Tap   .
         Add to Notes
Save the
graph to
iCloud Drive
Tap(Share),   then  Speed & Course Graph Image .
Tap  Save to Files            .
Send the
graph to
others
Tap(Share),   then  Speed & Course Graph Image .
Tap  Copy Image To or Air Drop, Message, or Mail.

Track Gaps and Track Segments:

What you see on the chart A gap in the track.
What you see on the graph

Dotted light brown vertical lines separate track segments.

The distance traveled during a gap is not shown.
Why a Gap Happens

Lost GPS Satellite reception.

Device is turned off or Battery charge goes to zero.

Record Track is  Off .

Record Track set to  When Live :

       Your iOS device goes to sleep.

       You switch to another App.

Record Track set to  Always :

       iOS needs the memory for another App.

      You remove iSailGPS NZ from the Recent Apps list.

Selecting a Range of Track Segments to Display on the Speed and Course Graph, and on the My Location screen:

Left
Choose the beginning track segment to display.

  1 is the oldest recorded track segment.

  The highest number you can get to by tapping +
  is the track segment that is currently being recorded.
Right
Choose the ending track segment to display.

  Set this to the same number as the left control
  to view only that one track segment.

These settings can also be used to select which track segments are used to create a route, to send in a GPX or KML file, or to delete from the track.

A track segment which is currently being recorded is always shown on the My Location screen even if it is not selected by these settings.

Track Timer, Odometer and Average Speed

If the selected track segments are all from the same outing, then view these numbers at the bottom of the track screen in the form

1:52    5.04 nmiles    2.7 knots average

The total elapsed time, including the time stopped and the time spend during any gaps, is shown in hours:minutes.

The total distance travelled, including the straight line distance between the ending and beginning track points of a gap, is shown in the units selected in the Settings app.

The average speed of all the track segments selected (excluding gaps and stopped time) is shown in the units selected in the Settings app.

If you have selected a group of track segments which appear to include track segments from more than one outing due to a large distance or a long time span for one of the gaps, then none of these numbers are shown because the app has no way to determine what you did during the gap. Reduce the number of track segments shown to view the numbers.

Deleting Track Segments:

HOW TODO THIS
Delete the
entire track 

Create a backup by emailing the track to yourself.

Tap .   Tap  Delete Entire Track  to remove the entire track from your device and the iCloud backup.
Delete
a range
of track
segments
Choose the beginning track segment to delete.   Left  

Choose the ending track segment to delete.     Right  

Tap .   Tap  Delete Track Segments … .

Auto-Delete: After 20000 track points have been recorded, the oldest track points are replaced with new ones.

Waypoints Screen:

Waypoint Coordinates are in the WGS 84 datum.
TAPRESULT
   +  Add a new waypoint.
  Share as a GPX or KML file.
a waypoint name           View, Edit, Hide, Delete, Go To, or Cancel Go To that waypoint.
Search bar Filter the waypoints by entering text contained in the name
or note, or by entering a latitude and/or longitude.
Cancel Stop search, remove on-screen keyboard.
Status bar Time Jump to the top of the list.
Scroll down to
Show Only Route Waypoints        Hide the display of all waypoint icons, names and comments except those used for the currently active navigation.
  Delete All  Clear all waypoints from the iOS device and the iCloud backup.
  Delete New  Clear all newly imported, created or moved waypoints from the iOS device and the iCloud backup.

A maximum of 8000 waypoints can be stored.

Adding Waypoints on the My Location Screen:

HOW TODO THIS
Add a waypoint
by Marking a location
Tap   , then Tap Current Location or Anywhere on the Chart.
Tap  Add New Waypoint            .

Optionally name your waypoint using letters, numbers & spaces.

Optionally tap the waypoint icon to choose a new icon.

Optionally erase the date and time in the Note.

Tap  Add  at the top.

Add a waypoint and
immediately start
navigating to it
Instead of tapping   Add  at the top:

If the keyboard is covering the green button,

tap    Done  on the keyboard.

Tap  Add & Go To  .

Add an instant MOB
(Man Overboard)
waypoint
Push and Hold    .

Creates an instant new waypoint for your current location, and starts navigation to it as the Go To waypoint. Named with the current date & time.

Add a waypoint using 
the distance and
direction from a point
you Mark
Tap   , then Tap Current Location or Anywhere on the Chart.
Tap  Projected Waypoint            .

Optionally name your new waypoint.

Optionally tap the waypoint icon to choose a new icon.

Enter the Bearing from the starting point to the projected waypoint.

Enter the Distance to the projected waypoint.

Tap  Add  at the top.

Adding Waypoints on the Track Screen:

HOW TODO THIS
Add a waypoint
using a point
on the Speed and
Course Graph
With one finger on the graph move the green line to the spot where you want a waypoint. Keep that finger down.
Using a 2nd finger : Tap(Share).
Optionally name your waypoint using letters, numbers & spaces.

Optionally tap the waypoint icon to choose a new icon.

Optionally erase or replace the Note text.

Tap  Add  at the top (or   Add & Go To   at the bottom).

Adding Waypoints on the Waypoints Screen:

HOW TODO THIS
Add a waypoint
using your
Current Position

Tap  +  .   Tap  Current Location .

Optionally name your waypoint using letters, numbers & spaces.

Optionally tap the waypoint icon to choose a new icon.

Optionally erase or replace the Note text.

Tap  Add  at the top (or   Add & Go To   at the bottom).
Add a waypoint
by finding its location
on a Satellite Map
Requires an
Internet connection
Tap  +  .   Tap  Satellite Map Locator .

Center the waypoint location under the crosshairs. Tap Mark .

Optionally name your waypoint using letters, numbers & spaces.

Optionally tap the waypoint icon to choose a new icon.

Tap  Add  at the top (or   Add & Go To   at the bottom).

Add a waypoint
by searching for the
location coordinates
of a Place Name

Requires an
Internet connection

Tap  +  .   Tap  Place Name or Address Lookup .

Enter the Place Name using letters, numbers, commas and spaces.
The place must be in New Zealand.

Tap  Search Places 

Verify the location. Place Name databases have inaccuracies. Two different places might have the same name.

Tap  Add  at the top (or   Add & Go To   at the bottom).

Add a waypoint
using Latitude and
Longitude or
Easting and Northing  

Choose the
Position Format
in the Settings app

Tap  +  . Tap  Latitude and Longitude 
Tap  +  . Por  UTM Coordinates 
Tap  +  . Por  TM2000 Coordinates .

Optionally name your waypoint using letters, numbers & spaces.

Optionally tap the waypoint icon to choose a new icon.

Enter the coordinates.
 To find coordinates, look up the site’s name on Wikipedia.
  In New Zealand, enter a minus sign in front of latitude numbers.

With latitude comma longitude on the clipboard,
paste into either empty text field to fill both.
Tap  Add  at the top (or   Add & Go To   at the bottom).
Add a waypoint
using the distance
and direction from
an existing waypoint
Tap  +  .

Tap  Bearing and Distance 

Tap the starting waypoint.

Optionally name your new waypoint.

Optionally tap the waypoint icon to choose a new icon.

Enter the Bearing from the starting waypoint to the projected waypoint.

Enter the Distance to the projected waypoint.

Tap  Add  at the top (or   Add & Go To   at the bottom).

Importing Waypoints:

HOW TODO THIS
Add a waypoint on
the Waypoints screen

using a
geotagged photo
from your Photos app

Tap  +  , then tap  A Geotagged Photo .

Tap the thumbnail image of the photo.

Optionally name your waypoint using letters, numbers & spaces.

Optionally tap the waypoint icon to choose a new icon.

Tap  Add  at the top (or   Add & Go To   at the bottom).
Add waypoint(s) by
importing a “.GPX”,
“.KML”, or “.LOC”
waypoints file
to iSailGPS NZ
from a web site link
in Safari
Go to the web page.

Tap the download link.

Tap Open In… if it appears. If not and you see nothing:

  Open the Files app.

  Open the Downloads folder

Tap ,  Downloads.

Find the downloaded file.

Tap the file icon.

Tap(Share).

Scroll horizontally to the Copy to iSailGPS NZ icon. Tap it.

Add waypoint(s) by
importing a “.GPX”,
“.KML”, or “.LOC”
waypoints file
to iSailGPS NZ
from another app
on your iOS device
Use(Share) in that app.

Scroll horizontally to the iSailGPS NZ icon. Tap it.

Add waypoint(s) by
importing a “.GPX”,
“.KML”, or “.LOC”
waypoints file
from iCloud Drive
Open the Files app.

Tap the waypoints file.

Tap(Share).

Scroll horizontally to the iSailGPS NZ icon. Tap it.
Add waypoint(s) by
importing a “.GPX”,
“.KML”, or “.LOC”
waypoints file
from the Notes app
on your iOS device
Open the Notes app.

Tap the note containing a waypoints file attachment.

Tap the attachment box.

Tap(Share).

Scroll horizontally to the Copy to iSailGPS NZ icon. Tap it.
Add waypoint(s) by
importing a “.GPX”,
“.KML”, or “.LOC”
waypoints file
to iSailGPS
on your iOS device
from another device

Use AirDrop

Use email

Use Messages

Use Dropbox

Use the Mac Finder
(or iTunes)

Details of a Specific Waypoint:

Newly added or edited waypoints are shown in red, hidden waypoints in gray, Go To waypoints in green.

HOW TODO THIS
View the details of a waypoint Tap the waypoint name.
View a waypoint on a chart Tap the waypoint name, then tap  View On A Chart  .
If no appropriate stored chart is available, the chart download screen will appear. If you choose to not download a chart, you will see the waypoint in Don't Show a New Zealand Chart mode.
View the Az/El sky graph with sunrise, sunset, moonrise and moonset times, and the moon phase for the waypoint location Tap the waypoint name.

Tap .

View the weather report for the waypoint location Tap the waypoint name.

Tap .

Update to iOS 16 or later to view weather information.
Edit a waypoint Tap the waypoint name, then tap  Edit  at the top.

Make your changes.

Tap  Done .
Choose a new waypoint icon Tap the waypoint name, then tap  Edit  at the top.

Tap the waypoint icon.

Tap the new icon.

Tap  Done .
Show the name
of a new waypoint icon
Tap the waypoint name, then tap  Edit  at the top.

Tap the waypoint icon.

Press and hold the new icon.
Choose a new waypoint icon
for multiple waypoints
Tap  Edit  at the top.
Tap the icon button ▢ so the outline turns blue
to select each waypoint for editing.
Tap(Share), then tap  Selected ( ▢ ) Waypoints .
Tap  Change Selected Icons           .
Tap the new icon.
Hide a single waypoint so it is not visible on the My Location screen Tap the waypoint name, then tap  Edit  at the top.
Tap  Visible   off. Tap  Done .
Hide all waypoints except for
those being used for navigation
Scroll to the bottom.

Tap  Show Only Route Waypoints   to ON.

Show text only (Name & Note)
with no waypoint icon
Tap the waypoint name, then tap  Edit  at the top.

Tap the waypoint icon.

Tap the blank icon.

Tap  Done .
Show Names & waypoint icons
only with no Note text
Go to the Home screen. Start the Settings App.

Scroll down to iSailGPS NZ. Tap it.

Tap  Waypoint Notes on Chart   OFF.
Move a waypoint to your
current location and elevation
Tap the waypoint name, then tap  Edit  at the top.
Tap  Move To Here . Tap  Done .
Move a waypoint
to anywhere on the
My Location screen
Tap    , then tap  Anywhere on the Chart  .

Move the chart to center the waypoint to be moved
under the red crosshairs.

Tap    , then tap  Move: …    .

Move the chart to center the new position
under the red crosshairs.

Tap    .

Select a regular waypoint
to Edit or Go To from the
My Location screen
Tap    , then tap  Anywhere on the Chart  .

Move the chart to center the waypoint to be selected
under the red crosshairs.

Tap    , then tap  Edit or Go To: ….

Measuring Distance Between Waypoints:

HOW TODO THIS
View the distance
between 2 waypoints

Tap , then tap  +  .

Tap  Waypoints .

Tap the name of the 1st waypoint.

Tap the button.

Tap  After this Waypoint .

Tap the name of the 2nd waypoint.

Read the distance.

Tap when you are done.

Sharing Waypoints:

HOW TODO THIS
Send all waypoints
via email
Tap(Share), then  All Waypoints , then   . In GPX format.
Email queued in your out box. Sent when the Internet connects.
Send a group of
selected waypoints
via email
Tap  Edit  in the top bar.
Tap the icon button ▢ so the outline turns blue
 to select each waypoint for sending.
Tap(Share), then  Selected ( ▢ ) Waypoints  , then   .
Send one waypoint
via email
Tap the Waypoint to send.
Tap  Go To  , then tap  < Waypoints  in the top bar.
Tap(Share), then  Go To Waypoint  , then   .
After finishing the email, tap the Waypoint again. Tap  Cancel Go To  .
Send waypoints
in GPX or KML
format to
other apps or
other devices

Use AirDrop

Use Dropbox

Use email (GPX only)

Use Copy to Send to another app

Use Messages (GPX only)

Use the Mac Finder
(or iTunes)

Save waypoints
in GPX format to
the Notes app
Tap(Share).
Tap  All Waypoints  or  Selected ( ▢ ) Waypoints  or  Go To Waypoint .
Tap    Add to Notes.
Save waypoints
in GPX or KML
format to
iCloud Drive
Tap(Share).
Tap  All Waypoints  or  Selected ( ▢ ) Waypoints  or  Go To Waypoint .
Tap    or    ,  then  .
Tap   for a GPX file,  or  Tap   ,  then .
View waypoints
in Google Earth
The Google Earth app
must be installed.
Tap(Share).
Tap  All Waypoints  or  Selected ( ▢ ) Waypoints  or  Go To Waypoint .
Tap   .   Tap the Google Earth app icon.

Deleting Waypoints:

HOW TODO THIS
Delete a waypoint Tap the waypoint name.  Tap .

or

Swipe the waypoint name left.  Tap  Delete  .

or

Tap  Edit.  Tap ,   Delete  ,  Done  .
Delete ALL waypoints

Create a backup by emailing the waypoints to yourself.

Scroll to the bottom of the page.

Tap  Delete All  .

Confirm by tapping  Delete ALL Waypoints  .
Delete New waypoints

When you import a GPX file and get waypoints you don’t want.

While scrolling to the bottom of the page, note all waypoints with red names. They will be deleted.

Tap  Delete New  .

Confirm by tapping  Delete New (RED) Waypoints  .

Navigating to Go To Waypoints:

A Go To waypoint is a waypoint indicating your planned destination. It can be either the final destination of your trip or some important place along the way.

On the Waypoints Screen:

HOW TODO THIS
Set a Go To waypoint Add the waypoint if it is not already on the list.

Tap the waypoint name.   Tap  Go To  .

Set a Go To waypoint and
jump to the My Location screen.
Tap the waypoint name.   Press and hold  Go To  .

            or, for a shortcut

Press and hold the waypoint name.
Clear a Go To waypoint

Tap the Go To waypoint name (shown in green text).

Tap  Cancel Go To  .

            or, for a shortcut

Press and hold the Go To waypoint name.

While navigating to a Go To waypoint, the Waypoints tab looks like this

and the top bar of the My Location screen shows this navigation information at very slow speeds:

The Estimated Time of Arrival is recalculated every few seconds, based on the your travel history since the Go To waypoint was set, and assuming that the trip ahead is similar in speed and direction. The ETA will not appear until you have sailed for a couple of minutes with track recording turned on, so your speed can be more accurately determined.

At faster speeds the Course Over Ground (the direction you are moving relative to ground-based locations) will be shown in black text instead of the compass reading in gray text.
HOW TODO THIS
Set a Go To Waypoint
from the My Location screen
Tap   , then tap  Anywhere on the Chart  .

Center the desired waypoint under the red crosshairs.

Tap   , then tap   Edit or Go To:     .

Press and hold   Go To  .

Routes Screen:

Route point coordinates are in the WGS 84 datum.
SYMBOLTYPE OF ROUTE
  Route Made with Waypoints
  Route Converted from a Track Log
  Route Converted from a Segmented Track Log


TAPRESULT
   +  Add a new route.
Don’t Show Any Route  No route is shown on the My Location chart.
a route name Make this the active route.
    Only the active route is shown on the My Location chart
  Share as a GPX or KML file.
  Edit, view, navigate or delete that route.
Search bar Filter the routes by entering text contained in the name or note.
Cancel Stop search, remove on-screen keyboard.
Status bar Time Jump to the top of the list.
Scroll down to
Delete All Clear all routes from the iOS device and the iCloud backup.
 Delete New Clear all newly created or imported routes from the iOS device and the iCloud backup.
A maximum of 2000 routes can be stored.
Each route can have up to 200 named route waypoints or 20000 unnamed route points.

Adding Routes:

HOW TODO THIS
Add a new Route
using existing
waypoints
Tap  +  .

Tap  Waypoints .

Tap the name of the waypoint where your route will start.

Tap (Insert) on the first route waypoint line.

Tap  Insert After this Waypoint .

Tap  Insert a Waypoint .

Tap the name of the last waypoint on your route.

Continue inserting waypoints until the route is finished.

Name your route using letters, numbers & spaces.

Add a Note (optional).

Tap  Done  at the top.

Add a new Route
by converting
the current track
into a route
Tap   +  .

Tap  Entire Current Track  or  Track Segments … .

(Set segments on the track screen.)

Tap  Edit .

Name your route using letters, numbers & spaces.

Add a Note (optional).

Tap  Done  at the top.

Add a new Route
by copying an
existing route
and then editing it
Tap   +  .

Tap  Copy an Existing Route .

Tap the name of the route to copy.

Edit the route.

Tap  Done  at the top.
Add a new Route
by reversing an
existing route
and then editing it
Tap   +  .

Tap  Reverse of an Existing Route .

Tap the name of the route to reverse.

Edit the route.

Tap  Done  at the top.

Importing Routes:

HOW TODO THIS
Add new Route(s) by
importing a “.GPX”
route or track file,
a “.TCX” fitness file,
or a “.KML” path file to
iSailGPS NZ from a
web site link in Safari
Go to the web page.

Tap the download link.

Tap Open In… if it appears. If not and you see nothing:

  Open the Files app.

  Open the Downloads folder

Tap ,  Downloads.

Find the downloaded file.

Tap the file icon.

Tap(Share).

Scroll horizontally to the Copy to iSailGPS NZ icon. Tap it.

Add new Route(s) by
importing a “.GPX”
route or track file,
a “.TCX” fitness file,
or a “.KML” path file to
iSailGPS NZ
from another app on
your iOS device
Use(Share) in that app.

Scroll horizontally to the iSailGPS NZ icon. Tap it.

Add new Route(s) by
importing a “.GPX”
route or track file,
a “.TCX” fitness file,
or a “.KML” path file
from iCloud Drive
Open the Files app.

Tap the route or track file.

Tap(Share).

Scroll horizontally to the iSailGPS NZ icon. Tap it.
Add new Route(s) by
importing a “.GPX”
route or track file,
a “.TCX” fitness file,
or a “.KML” path file
from the Notes app
on your iOS device
Open the Notes app.

Tap the note holding a route, track, path, or fitness file attachment.

Tap the attachment box.

Tap(Share).

Scroll horizontally to the Copy to iHikeGPS NZ icon. Tap it.

Add new Route(s) by
importing a “.GPX”
route or track file,
a “.TCX” fitness file,
or a “.KML” path file
to your iOS device
from another device

Use AirDrop

Use email

Use Messages

Use Dropbox

Use the Mac Finder
(or iTunes)

The Routes screen shows newly added or edited routes in red.

Details of a Specific Route:

HOW TODO THIS
View the details o a route Tap for that route.
View a route on a chart Tap for that route.
Tap  View On A Chart  .
If no stored chart is available, the chart download screen will appear. If you choose to not download a chart, you will see the route in Don't Show a New Zealand Chart mode.
Edit a route Tap for that route.
Tap  Edit  at the top.

Make your changes.

Tap  Done .

Navigating a Route:

HOW TODO THIS
Start navigating a route
Tap for that route, then
Tap  Navigate Forward  or  Navigate Reverse  .
Start navigating a route and
jump to the My Location screen
Tap for that route, then
Press and hold
        Navigate Forward  or  Navigate Reverse  ,

            or, for a shortcut

Press and hold the route name (for Forward).
Show ETAs to the final destination
and all intermediate waypoints
Turn on track recording
Stop navigating a route Tap for that route, then
Tap  Cancel Forward  or  Cancel Reverse  ,

            or, for a shortcut

Press and hold the route name.
Get driving directions to the
start of a route
Requires an Internet connection
Tap for that route, then
Tap  Driving Directions To .

While navigating a route, the Routes tab looks like this

Sharing Routes:

HOW TODO THIS
Send one route
via email
in GPX format
Tap the Route to send.
Tap(Share), then  Active Route (✓)  , then   .
Email queued in your out box. Sent when the Internet connects.
Send a group of
selected routes
via email
Tap  Edit  in the top bar.
Tap the icon button ▢ so the outline turns blue
 to select each route for sending.
Tap(Share), then  Selected ( ▢ ) Routes  , then   .
Send all routes
via email
Tap(Share), then  All Routes , then   .
Send a route
and all nearby
visible waypoints
in a single file
via email
Tap the Route to send, then(Share).
Tap  Active Route (✓) , then  Include Waypoints , then   .
Note: Exclude any unwanted nearby waypoints by going to the
          Waypoints screen and turning off their Visible switches.
Send routes
in GPX or KML
format to
other apps or
other devices

Use AirDrop

Use Dropbox

Use email (GPX only)

Use Copy to Send to another app

Use Messages (GPX only)

Use the Mac Finder
(or iTunes)

Save routes
in GPX format to
the Notes app
Tap(Share).
Tap  Active Route (✓)  or  Selected ( ▢ ) Routes  or  All Routes  .
Tap    Add to Notes.
Save routes
in GPX or KML
format to
iCloud Drive
Tap(Share).
Tap  Active Route (✓)  or  Selected ( ▢ ) Routes  or  All Routes  .
Tap    or    ,  then  .
Tap   for a GPX file,  or  Tap   ,  then .
View routes
in Google Earth
The Google Earth app
must be installed.
Tap(Share).
Tap  Active Route (✓)  or  Selected ( ▢ ) Routes  or  All Routes  .
Tap   .   Tap the Google Earth app icon.

Deleting Routes:

HOW TODO THIS
Delete a route
Tap for that route.   Tap .
or
Swipe route name left. Tap  Delete  .

or

Tap  Edit.  Tap ,   Delete  ,  Done  .
Delete ALL routes

Create a backup by emailing all routes to yourself.

Scroll to the bottom of the page.

Tap  Delete All  .

Confirm by tapping  Delete ALL Routes  .
Delete New routes

When you import a GPX file and get routes you don’t want.

While scrolling to the bottom of the page, note all routes with red names. They will be deleted.

Tap  Delete New  .

Confirm by tapping  Delete New (RED NAME) Routes  .

Types of Routes:

  Route with Waypoints

Route waypoint names are shown in Italics  to distinguish them from regular waypoints.

While Showing the Details of a Route:

TAPRESULT
 
View On
A Chart
Picks the best already-downloaded chart.

Shows it on the My Location screen.

If no stored chart is available, the chart download screen will appear. If you choose to not download a chart, you will see the route in Don't Show a New Zealand Chart mode.
 
Navigate
Forward
Start at route waypoint 1.

Automatically Go To each waypoint in order.

 
Navigate
Reverse
Start at the last waypoint.

Automatically Go To each waypoint in reverse order.

a waypoint name
(when navigating)
Manually make this waypoint the Go To waypoint.
 
Cancel
Forward
or
Cancel
Reverse
Stop the currently active navigation.
Swipe waypoint name left    Delete  that waypoint from the route.
Clear the whole route from the iOS device
and the iCloud backup.
Status bar Time Jump to the top of the list.
  Routes  Return to the Routes screen.
   Edit  Edit the Route.

After Tapping  Edit :

TAPRESULT
Name text Edit the route name.
Note text Edit the route note.
  Insert a waypoint before or after this waypoint.
    for the first waypoint Optionally combine routes by inserting another waypoint route before the first route waypoint.
    for the last waypoint Optionally combine routes by inserting another waypoint route after the last route waypoint.
a waypoint name Edit the waypoint name, note, location and elevation,
or delete the waypoint from the route.
   Cancel  Keep the route as it was with no changes.
   Done  Save changes to the route.

Route waypoint names are shown in Italics  to distinguish them from regular waypoints.

Each waypoint entry in the table shows the great circle distance and bearing from the previous waypoint and the total distance along the route. When the distance is long enough that the bearing changes along the path, the “at” bearing is the bearing leaving the previous waypoint, and the “to” bearing is the bearing arriving at the new waypoint.

The route screen shows newly added or edited waypoints in red.

If a route waypoint is identical to a regular waypoint, then they are linked so that only one of them shows on the chart. To break the link:

  • Edit the route waypoint      or
  • Edit the regular waypoint when the route containing the route waypoint IS NOT selected on the Routes screen.

To edit a waypoint without breaking the link:

  • Edit the regular waypoint when the route containing the route waypoint IS selected on the Routes screen.

Deleting one of the linked waypoints will not delete the other.

  Route Converted from a Track Log

While Showing the Details of a Route:

TAPRESULT
 
View On
A Chart
Picks the best already-downloaded chart.

Shows it on the My Location screen.

If no stored chart is available, the chart download screen will appear. If you choose to not download a chart, you will see the route in Don't Show a New Zealand Chart mode.
 
Navigate
Forward
Follow the route from start to finish.
 
Navigate
Reverse
Follow the route in the opposite direction.
 
Cancel
Forward
or
Cancel
Reverse
  
Stop the currently active navigation.
Clear the whole route from the iOS device
and the iCloud backup.
  Routes  Return to the Routes screen.
   Edit  Edit the Route.

While navigating, the navigation information in the top bar on the My Location screen will automatically include the distance and ETA information for the next waypoint from the main waypoint list which is within about 150 metres of the route path.

This works best for routes which are one way paths. Don't make the trip there and the trip back into a single route. Use  Navigate Forward  on the path for the trip there, and then use  Navigate Reverse  for the trip back.

After Tapping  Edit :

TAPRESULT
Name text Edit the route name.
Note text Edit the route note.
    Beginning of Route Combine routes by inserting another track route
before the existing route.
    End of Route Combine routes by inserting another track route
after the existing route.
   Cancel  Keep the route as it was with no changes.
   Done  Save changes to the route.

Route Shown on the My Location Screen

 Not Editing:
     Route Line
 While Editing:
     Route Line & Points

Delete a Point on the Route while Editing:

  1. If the keyboard is showing, tap   Done   on the keyboard.
  2. Tap   .
  3. Tap    , then tap  Anywhere on the Chart  .
  4. Move the chart to center the desired route point under the red crosshairs.
  5. Tap    .
  6. Tap  Delete Route Point       .

Insert a Gap into the Route while Editing:

  1. If the keyboard is showing, tap   Done   on the keyboard.
  2. Tap   .
  3. Tap    , then tap  Anywhere on the Chart  .
  4. Move the chart to center in the red crosshairs the route point that you want to be the first point after the new gap.
  5. Tap    .
  6. Tap  Insert Route Gap Before       .

  Route Converted from a Segmented Track Log

While Showing the Details of a Route:

TAPRESULT
 
View On
A Chart
Picks the best already-downloaded chart.

Shows it on the My Location screen.

If no stored chart is available, the chart download screen will appear. If you choose to not download a chart, you will see the route in Don't Show a New Zealand Chart mode.
 
Navigate
Forward
Start at the beginning of the first route segment. Follow the route to the end of the last segment, including gaps.
 
Navigate
Reverse
Start at the end of the last route segment. Follow the route to the beginning of the first route segment, including gaps.
 
Cancel
Forward
or
Cancel
Reverse
Stop the currently active navigation.
Swipe a Gap left  Delete  the Gap to join the two adjacent route Segments.
Swipe a route Segment  Delete  that route Segment from the route.
Clear the whole route from the iOS device
and the iCloud backup.
Status bar Time Jump to the top of the list.
  Routes  Return to the Routes screen.
   Edit  Edit the Route.

While navigating, the navigation information in the top bar on the My Location screen will automatically include the distance and ETA information for the next waypoint from the main waypoint list which is within about 150 metres of the route path.

This works best for routes which are one way paths. Don't make the trip there and the trip back into a single route. Use  Navigate Forward  on the path for the trip there, and then use  Navigate Reverse  for the trip back.

After Tapping  Edit :

TAPRESULT
Name text Edit the route name.
Note text Edit the route note.
Visible Hide or show that route Segment on the My Location chart.
  for a Segment Delete that route Segment from the route.
  for a Gap Delete the Gap to join the two adjacent route Segments together.
  Beginning of Route Combine routes by inserting another track route
before the first route segment.
  End of Route Combine routes by inserting another track route
after the last route segment.
   Cancel  Keep the route as it was with no changes.
   Done  Save changes to the route.

Segmented Route Shown on the My Location Screen

 Not Editing:
     Route Line
 While Editing:
     Route Line & Points

Delete a Point on the Route while Editing:

  1. If the keyboard is showing, tap   Done   on the keyboard.
  2. Tap   .
  3. Tap    , then tap  Anywhere on the Chart  .
  4. Move the chart to center the desired route point under the red crosshairs.
  5. Tap    .
  6. Tap  Delete Route Point       .

Insert a Gap into the Route while Editing:

  1. If the keyboard is showing, tap   Done   on the keyboard.
  2. Tap   .
  3. Tap    , then tap  Anywhere on the Chart  .
  4. Move the chart to center in the red crosshairs the route point that you want to be the first point after the new gap.
  5. Tap    .
  6. Tap  Insert Route Gap Before       .

Chart List Screen:

To add a new chart to the iOS Device's memory or to search for a place name,
you must have a WiFi connection or cell service.

To Download a New Chart on the Chart List Screen

Tap  +  , then choose one:

TAPTO DOWNLOAD A CHART
Current Location

For where you are now.

Relative to Current Chart
North, South, East, or West of the chart currently
showing on the My Location screen.
Same Chart Location
A chart with a different scale for the same area.
  Satellite Map Locator *
Find the place you want on a satellite map.
Place Name
or
Chart Name
Search for location coordinates by:
    Geographic feature
    City
    Chart name
    NZ Marine Chart number *
Latitude and Longitude
or
UTM Coordinates
or
TM2000 Coordinates
In New Zealand, use a minus sign in front of latitude numbers.
        Change the Position Format in the Settings app.
        With latitude comma longitude on the clipboard,
        paste into either empty text field to fill both.
All Points in a GPX File
Use to download every chart needed
to show all location points included
in a waypoints, tracks, routes, or chart list GPX file.
All NZ Marine Charts
Download all NZ Marine charts which
have not been downloaded yet.
Last Deleted Chart
Re-download the chart you just deleted.
Handy for updating a chart to the latest version.

There are usually several charts for a given location, each with a different scale. Once you obtain the latitude and longitude by using one of the options above, the scale bar shows the available chart scales for that location.

Tap  Add All … Charts and Their Insets  to download the whole set of charts shown in a single operation. Usually you will want all of these chart scales for your location.
(Not available on devices with a 3.5" screen.)

To download only a single digital chart, tap the button for the scale you want, then tap  Add Selected Chart .

Some paper charts have insets, such as closeups of harbors, in addition to the main chart. These insets are provided as separate digital charts. To download all available sections of one chart, select the chart, then tap  Add Selected Chart and All Its Insets  .
(Not available on devices with a 3.5" screen.)

The Chart List screen shows newly added charts in RED.

You can store a few charts or charts for the entire country on your iOS device. They are sorted, first by center latitude and then by center longitude, so charts for adjacent areas tend to be close together in the list.

The names of charts that are currently being shown on the My Location page are shown in BOLD text on the Chart List page.

* The Satellite Map Locator also shows the border lines of your already-downloaded charts:


HOW TODO THIS
Open a chart for a point
on the Satellite Map Locator screen
Pan the locator map to center the point at the crosshairs intersection.

Tap  View On A Chart  .

If no chart for that point has yet been downloaded, the chart download screen will appear, allowing you to download one.
The My Location screen will appear showing the chart centered on the point you selected.
Show the name of an already downloaded chart which is visible
on the Satellite Map Locator screen        
Pan the locator map so the crosshairs intersection is inside the chart border lines.

Tap  + .

Note the Chart Name near the top of the screen.

Tap  Cancel .

Tap  Cancel .

The chart list will scroll so the desired chart is visible near the center of the screen.

To Download Charts with Multiple Sections

* Each paper chart has a number, such as nz5124, assigned by LINZ to the chart.

Many paper charts have multiple charts printed on one piece of paper. For example there may be one chart section showing an entire bay, and a second chart section showing a close-up of a harbor.

For digital charts, these individual chart sections are indicated by a two digit section number added to the end of the chart number. The main chart section is indicated by 01 at the end, for example nz512401. The close-up sections are indicated by 02, 03, etc.

On paper, the close-up chart sections are often shown as insets. In iSailGPS NZ, each chart section is shown individually so that each can have its location properly georeferenced.

To manually download separately each individual section of a multi-section chart:

  1. Tap the Chart List tab.
  2. Tap  +  .
  3. Tap  Place Name or Chart Name .
  4. Enter only the main paper chart number under  Search for the Coordinates of .
    For example enter nz5124, not nz512401.
  5. Tap  Search  on the keyboard.
  6. In addition to returning location coordinates, under  Search for the Coordinates of  iSailGPS NZ will return the full chart number for the last available chart section. For example enter nz5124, tap  Search , and you will see nz512403. The 03 on the end means that chart nz5124 has three chart sections.
  7. To download all three sections individually, download charts nz512403, nz512402 and nz512401.

    Enter the full chart number under  Search for the Coordinates of .

    Tap  Search  on the keyboard.

    Tap  Add Selected Chart  .

    Repeat for each chart section.

To Download a New Chart
on the My Location Screen

TAPTO DOWNLOAD
Double tap
a blank
white space
on the chart
If no already-downloaded chart appears in the white space:

Tap  Download Chart .

Tap the button for the Scale you want at the point where you double tapped.

Tap  Add Selected Chart  .

,

then tap

Anywhere on
the Chart

Move the chart to center the point you want to see on the new chart under the red crosshairs.

Tap    .



.          

Tap  New Chart
        New Scale

Tap the  Scale  button for the chart scale that you want.

Tap  Get NZ Marine Chart  .

,

then tap

Current
Location


.          

Tap  New Chart
        New Scale
Tap the  Scale  button for the chart scale that you want.

(If you choose one of the left two scales, the new chart scale that you choose will show as either the Most Detail scale or the More Area scale for Current Location selected near the top of the Chart List screen table.)

Tap  Get NZ Marine Chart  .

If You Have Trouble Finding
the Correct Chart

Try this web site:

WEBSITETO FIND
New Zealand Chart Finder Online searchable database and chart catalog
with available charts.

To Access Your Already-Downloaded Charts

Tap one of these options on the Charts List.

A checkmark shows your current choice.

TAPRESULT
Don’t Show a New Zealand Chart * On the My Location screen, view your Tracks, Waypoints, Routes and Current Position on a white background.
NZ Marine Chart for Current Location
Most detail (smallest downloaded scale) *
Does 2 things:

1. While sailing or panning, a chart of the tapped type is shown. The current preferred chart type is indicated by underlined text, e.g. NZ Marine Chart.

2. As you travel, the My Location screen switches charts automatically as needed.
NZ Marine Chart for Current Location
More area (next larger downloaded scale) *
A specific chart name
on the chart list *
This chart shows on the My Location screen whether your current location is there or not.

Use this option to view charts for other areas.

* Then tap the  My Location  tab once (not twice) to view the chart.

or

   Press and hold the chart name to immediately view that chart on the My Location screen.
TAPRESULT
Time Jump to the top of the list.
Search bar Find an already-downloaded chart by chart name, by NZ Marine Chart number, or by latitude & longitude. This search works by filtering the charts displayed in the Chart List table to show only those which match the search criteria you have entered.
To see only charts within a 1° x 1° square area, enter whole numbers with no decimal point for the latitude and longitude. To see only charts within a 0.1° x 0.1° area, enter numbers with one digit after the decimal point.
   Cancel  Stop search, remove on-screen keyboard.
   Edit  Remove a chart: Tap ,   Delete  ,  Done  .
Scroll down to
   Delete All  Erase all downloaded charts from the iOS device.
 Delete New Clear all newly downloaded charts from the iOS device.
Use this if a download contains charts you didn’t expect and don’t want.

Sharing the Chart List as a GPX Waypoints File:

All charts on the list are included.
Each waypoint's coordinates are for the center of that chart.
Each waypoint's name, comment, and description are the chart's number, name, and scale.

HOW TODO THIS
Send the chart list
via email
Tap(Share). Tap   .

Email queued in your out box. Sent when the Internet connects.

Send the chart list
in GPX format
to other apps
or other devices

Use AirDrop

Use email

Use Messages

Use Dropbox

Use Copy to Send to another app

Use the Mac Finder
(or iTunes)

Save the chart list
to the Notes app
Tap(Share).   Tap    Add to Notes.
Save the chart list
to iCloud Drive
Tap(Share).   Tap   .   Tap   . Tap  .
To download all charts in a GPX chart list file:
  On the Chart List screen, tap  + , then tap  All Points in a GPX File.

Charts Available within iSailGPS NZ:

NZ Marine raster charts are available for all of the coasts of New Zealand and the surrounding islands. Lake Taupo and Lake Wakatipu are also included.

Updating Charts:

Individual charts are updated by LINZ when significant changes warrant the update. These changes are published in the “Notice To Mariners”.

To get the new version of a single chart that you have already downloaded:

  1. Tap the Chart List tab.
  2. Scroll to the chart you want to update. Note the chart scale.
  3. Tap   Edit   at the top right.
  4. Tap the button by the chart name.
  5. Tap   Delete   at the right. The old chart has been removed.
  6. Tap   Done   at the top right.
  7. Tap   +   at the top left.
  8. Tap   Last Deleted Chart  .
  9. Tap the Scale you noted in 2 above.
  10. Tap  Add Selected Chart  .

If no new version of a particular chart is available, this process will just re-download the same chart version you previously had.

To get the most recent version of all NZ Marine charts that you have already downloaded:

  1. Tap the Chart List tab.
  2. Scroll to the bottom of the list.
  3. Tap   Delete All   at the bottom right.
  4. Tap   Delete ALL Charts  .
  5. Close the iSailGPS NZ app.
  6. Restart the iSailGPS NZ App.
  7. When you see the Missing Charts alert, tap  Download Now .
  8. Tap  Re-download All Previous Charts.

NZ Marine Charts Legend:

International Hydrographic Organization Chart Symbols

Import:


GPX files are the preferred file type for exchanging waypoints, routes and tracks with other applications and other users, and for storing iSailGPS NZ data outside the app.

KML files can contain many things besides waypoints, paths, and tracks. When importing a KML file, all of these other things are completely ignored. The waypoints are imported as waypoints. The paths and tracks are imported as routes.

TCX files are Training Center files. Read-only support is provided for single route import from fitness apps. The .tcx file name is used as the route name.

Use AirDrop to Send Tracks, Waypoints or Routes to iSailGPS NZ:

Requires close proximity, but works even at sea with no cell or Internet connection.
  1. Unlock your iOS device. Ask the sender to unlock their iOS device.
  2. Open Control Center on both devices.
  3. Long Press
  4. if it is showing.
  5. Tap Air Drop to see

    Tap  Everyone  on both devices.

  6. Close Control Center.
  7. Have the sender tap(Share) in the sending app for the GPX-formatted data.
  8. If the sender sees then ask the sender to position his device very close to yours, and wait until he sees
    This may appear quickly, or it could take a couple of minutes. Move the devices closer if it is not working.
  9. Have the sender tap your name.
    You will see    

    Tap  iSailGPS NZ  .

If the AirDrop transfer fails:

  1. Open Control Center on both devices.
  2. Turn on Airplane Mode.
  3. Wait several seconds.
  4. Turn off Airplane Mode.
  5. Close Control Center.
  6. Try again.

Send Track, Waypoint and Route Files to iSailGPS NZ from a link on a web page.

  1. Go to the web page in Safari.
  2. Tap the download link.
  3. Tap Open In… if it appears.
  4. If not and you see nothing:
        Open the Files app.
        Open the Downloads folder.
    Tap the Safari Downloads button .
        Find the just-downloaded file.
        Tap the file icon.
        Tap (Share).
  5. Scroll horizontally to the Copy to iSailGPS NZ icon.
  6. Tap it.

Email Tracks, Waypoints and Routes To iSailGPS NZ:

Requires an Internet connection.
  1. Create an email with a “.GPX”, “.KML”, “.TCX”, or “.LOC” file attachment on another device.
  2. Send it to your iOS device's email address.
  3. Open it in Mail :
  4. If you see  Tap to Download  or a downward facing arrow, tap it and wait until the download is finished.
  1. Don’t tap the attachment icon button. Instead touch lightly (NOT 3D Touch) and hold your finger on the attachment icon button until you see a change in the display, then lift your finger.
  2. Tap:     Share     .
  3. Tap: iSailGPS NZ.

Use iMessage to Send Tracks, Waypoints and Routes To iSailGPS NZ:

Requires an Internet connection.
  1. Using the Messages app on another iOS device or a Mac, create a message with a “.GPX”, “.KML”, “.TCX”, or “.LOC” file attachment.
  2. Send it using iMessage (not SMS).
  3. Open it in the Messages app on your iOS device.
  4. Tap the gpx, kml, tcx, or loc file icon once quickly. If a new screen pops up showing the file text, go to step 9. If nothing happens in response to the tap, go on to step 5.
  5. If you are using iOS 12, tap the circular avatar image(s) at the top of the screen which show who the message is from (and the other participants in the message group if any).
  6. Tap to bring up a Details screen.
  7. Look near the bottom for
    Tap Attachments.
  8. You will see (scroll down if necessary) the file icon for the waypoint that you want to send to iSailGPS NZ. (There may be other icons showing also if other earlier parts of this iMessage conversation have attachments). Tap this file icon.
  9. Tap(Share).
  10. Tap: Copy to iSailGPS NZ.

Use Notes to Send Tracks, Waypoints and Routes To iSailGPS NZ:

  1. Open the Notes app. View a note which has a “.GPX”, “.KML”, “.TCX”, or “.LOC” file attachment.
  2. Touch and hold your finger on the attachment icon button until you see a change in the display, then lift your finger.
  3. Tap(Share).
  4. Tap: Copy to iSailGPS NZ.

Import a Tracks, Waypoints or Routes File Stored in iCloud Drive:

Requires an Internet connection.
  1. Open the Files app.
  2. Navigate to a “.GPX”, “.KML”, “.TCX”, or “.LOC” file.
  3. Tap the file.
  4. Tap(Share).
  5. Tap: Copy to iSailGPS NZ.

Use Dropbox to Send Tracks, Waypoints and Routes To iSailGPS NZ:

Requires an Internet connection.
  1. Install Dropbox on the device that contains the file.
  2. Transfer the “.GPX”, “.KML”, “.TCX”, or “.LOC” file to this Dropbox.
  3. Install the free Dropbox App on your iOS device.  
  4. Tap the Dropbox App icon.
  5. Tap the Files tab.
  6. Tap the desired file.
  7. Tap ... .   Then tap  Export .
  8. Tap:  Open In… .
  9. Tap: Copy to iSailGPS NZ.

Send Track, Waypoint and Route Files to iSailGPS NZ
using the  isailgpsnz://  URL scheme:

Requires an app on your device which can send a custom URL request.
  1. Create or locate a “.GPX”, “.KML”, “.TCX”, or “.LOC” file.
  2. Send the file using the  isailgpsnz://  custom URL scheme with the path to the file.

                    isailgpsnz://your_file_path

    (See instructions for the sending app.)
  3. Send  isailgpsnz://  by itself to simply open the iSailGPS NZ app without importing anything. You can preview this using Safari.

Use the Mac Finder or iTunes to Send
Tracks, Waypoints and Routes To iSailGPS NZ:

Requires connecting your iOS device to your computer with a USB cable.
  1. Open a Finder window or start iTunes on your computer.
  2. Select your iOS device in the pull-down menu from the top bar or in the left column.

  3. Click  Apps  or  File Sharing  or  Files  in the left column or in the top bar.


  4. Scroll down the page. Under File Sharing click iSailGPS NZ, or click the triangle next to the iSailGPS NZ icon.

  5. Select a “.GPX”, “.KML”, “.TCX”, or “.LOC” file which is under 5 MBytes in size,
    then drag and drop it onto the Inbox folder.
  6. Start iSailGPS NZ on your iOS device.

After Import:

Tab-bar icon badges show the number of new waypoints and/or routes imported.

The Waypoints screen shows the newly imported waypoints in red.

If the imported file contains a waypoint with a different location but the same name as an existing waypoint, then the new waypoint will be renamed rather than overwriting the existing waypoint. For example a waypoint with a duplicate name of “The Bluff” would be renamed “The Bluff01”.

The Routes screen shows the newly imported tracks and routes in red.

If the imported file contains a route or a track with the same name as an existing route, the new route will be renamed rather than overwriting the existing route. For example a route with a duplicate name of “Cavalli Passage” would be renamed “Cavalli Passage01”.

If the imported file contains routes or waypoints you didn’t expect and don’t want, Use the  Delete New  option (scroll to the bottom of the page) to remove them.

Export:


AirDrop,   Email,   Messages,   Dropbox,   Copy to,   iCloud,   Mac Finder or iTunes

Note: Export KML files only when the destination app is Google Earth. Otherwise export GPX files which contain more complete information for import into other apps.

Send Tracks, Waypoints, Routes or a Screen Image to another iOS device using AirDrop:

Requires close proximity, but works even at sea with no cell or Internet connection.
  1. Unlock your iOS device. Ask the intended recipient to unlock their iOS device.
  2. Open Control Center on both devices.
  3. Long Press
  4. if it is showing.
  5. Tap Air Drop to see

    Tap  Everyone  on both devices.

  6. Close Control Center.
  7. Tap , , or .
  8. Tap(Share)   or      .
  9. Tap   Track Segments …  or   Entire Track   or   Speed & Course Graph Image   or
    Tap   All Waypoints    or   Selected ( ▢ ) Waypoints    or   Go To Waypoint   or
    Tap   Active Route (✓)   or   Selected ( ▢ ) Routes   or   All Routes   or
    Tap   Current Location      or   Anywhere on the Chart  .
  10. Tap   , , or .

    Use KML only if you know the application you are sending to requires KML (i.e. Google Earth).

  11. If you see then ask the intended
    recipient to unlock their iOS device if it has gone into sleep mode.
  12. Position your device very close
    to theirs, and wait until you see
  13. This may appear quickly, or it could take a couple of minutes. Move the devices closer if it is not working.
  14. Tap the intended recipient. He will see something like

If the AirDrop transfer fails:

  1. Open Control Center on both devices.
  2. Turn on Airplane Mode.
  3. Wait several seconds.
  4. Turn off Airplane Mode.
  5. Close Control Center.
  6. Try again.

Send Tracks, Waypoints or Routes by Email:

Use any time. Email will be queued in the Mail app’s Outbox until you have an Internet connection.

Email includes a GPX file attachment.

  1. Tap , or .
  2. Tap(Share).
  3. Tap   Track Segments …  or   Entire Track   or
    Tap   All Waypoints    or   Selected ( ▢ ) Waypoints    or   Go To Waypoint   or
    Tap   Active Route (✓)   or   Selected ( ▢ ) Routes   or   All Routes   or
  4. Tap   .
  5. Enter an email address in the To: area.
  6. Optionally change the Subject and the body of the email.
  7. Tap  Send .

Send Tracks, Waypoints or Routes to Another Apple Device through Messages:

iMessage includes a GPX file attachment.

Requires an Internet connection.
  1. Tap , or .
  2. Tap(Share).
  3. Tap   Track Segments …  or   Entire Track   or
    Tap   All Waypoints    or   Selected ( ▢ ) Waypoints    or   Go To Waypoint   or
    Tap   Active Route (✓)   or   Selected ( ▢ ) Routes   or   All Routes   or
  4. Tap   . You may need to wait several seconds for the New Message screen to appear while the operating system checks for network availability.
  5. Enter a iPhone phone number or an iCloud email address in the To: area.
  6. Optionally change the text of the message.
  7. Tap  Send .

Send Tracks, Waypoints or Routes through Dropbox:

Use any time. The file will be queued until you have an Internet connection.
  1. Install the free Dropbox App on your iOS device.
  2. Tap , or .
  3. Tap(Share).
  4. Tap   Track Segments …  or   Entire Track   or
    Tap   All Waypoints    or   Selected ( ▢ ) Waypoints    or   Go To Waypoint   or
    Tap   Active Route (✓)   or   Selected ( ▢ ) Routes   or   All Routes   or
  5. Tap    or    .

    Use KML only if you know the application you are sending to requires KML (i.e. Google Earth).

  6. Tap: Copy to Dropbox (Not Save to Dropbox).
  7. Tap  Save .

Send Tracks, Waypoints or Routes to Another App on your iOS device

The other app must accept files in GPX or KML format.
  1. Tap , or .
  2. Tap(Share).
  3. Tap   Track Segments …  or   Entire Track   or
    Tap   All Waypoints    or   Selected ( ▢ ) Waypoints    or   Go To Waypoint   or
    Tap   Active Route (✓)   or   Selected ( ▢ ) Routes   or   All Routes   or
  4. Tap    or    .

    Use KML only if you know the application you are sending to requires KML (i.e. Google Earth).

  5. Tap the app icon.

Save Tracks, Waypoints, Routes or a Screen Image to iCloud Drive:

Use any time. The file will be queued until you have an Internet connection.
  1. Tap , , or .
  2. Tap(Share)   or      .
  3. Tap   Track Segments …  or   Entire Track   or   Speed & Course Graph Image   or
    Tap   All Waypoints    or   Selected ( ▢ ) Waypoints    or   Go To Waypoint   or
    Tap   Active Route (✓)   or   Selected ( ▢ ) Routes   or   All Routes   or
    Tap   Current Location      or   Anywhere on the Chart  .
    Tap    or   .
    Tap  .
    Tap   for a GPX or image file, or
     tap    or   , then .

Send Tracks, Waypoints or Routes to Your Computer
through the Mac Finder (or iTunes):

Requires connecting your iOS device to your computer with a USB cable.
  1. Tap , or .
  2. Tap(Share).
  3. Tap   Track Segments …  or   Entire Track   or
    Tap   All Waypoints    or   Selected ( ▢ ) Waypoints    or   Go To Waypoint   or
    Tap   Active Route (✓)   or   Selected ( ▢ ) Routes   or   All Routes  .
  4. Tap   Send GPX File Via iTunes or the Mac Finder
       or   Send KML File Via iTunes or the Mac Finder .

    Use KML only if you know the application you are sending to requires it (i.e. Google Earth).

  5. Connect the iOS device to your computer.
  6. Open a Finder window or start iTunes on your computer.
  7. Select your iOS device in the pull-down menu from the top bar or in the left column.

  8. Click  Apps  or  File Sharing  or  Files  in the left column or in the top bar.


  9. Scroll down the page. Under File Sharing, click iSailGPS NZ.


  10. To the right, select a “.gpx” or “.kml” file.
  11. Drag and Drop that file to a folder in the Mac Finder.
  12. Open the “.gpx” or “.kml” file using a compatible mapping program of your choice.
  13. To remove a file from iSailGPS NZ Documents, select it, then push the delete key while holding down the Command key.

Choose your Settings for iSailGPS NZ:

Go to the Home screen.
Start the Settings app.
Scroll down to iSailGPS NZ. Tap it.

OPTIONAVAILABLE SETTINGS
Auto-Lock

ON *      Use the system Auto-Lock setting.

OFF       Never Auto-Lock.
Stitch Charts

ON        Show multiple charts stitched together.

OFF *    Show only one chart at a time.
Position Format

ddd.ddddd°             Degrees

ddd° mm.mmm' *    Degrees Minutes

ddd° mm' ss.s"        Degrees Minutes Seconds

UTM / UPS              Universal Transverse Mercator Grid Coordinate System

TM2000                  New Zealand Grid Coordinate System (NZ only)
Distance Units statute miles         speed: miles per hour

nautical miles       speed: knots

kilometres *           speed: km per hour
Elevation Units

feet

metres *
Direction Units

° True *               Degrees clockwise from True North

° Magnetic       Degrees clockwise from Magnetic Compass North
Waypoint Notes on Chart

ON *     Waypoint Notes overlaid on the chart.

OFF     Waypoint Notes not visible on the chart.
Waypoints On Speed Graph

ON *     Waypoints along the path are shown.

OFF     Waypoints not shown on the graph.
Proximity Sensor

ON        Turn off the screen when near an object.

OFF *    Don’t use the proximity sensor.
* Default Setting
  Not all iOS devices have a proximity sensor.
If you ever see
or
on the My Location Screen
or

If the Heading display always shows  - - -

or

If you tapped Don’t Allow when asked to use your Current Location:

 

To use most features of iSailGPS NZ, Location Services in the Settings app must be ON.

  1. Go to the Home screen.
  2. Start the Settings app.
  3. Tap Privacy & Security.
  4. Tap Location Services.
  5. Make sure Location Services is ON.
  6. Scroll Down to iSailGPS NZ.
  7. Tap it, then tap While Using the App.
  8. Turn ON the Precise Location switch.
  9. Tap < Back in the top left corner.
  10. Scroll to the bottom of the screen and tap
    System Services.
  11. Tap the Compass Calibration switch to ON.
  12. Go to the Home screen.
  13. Restart the iSailGPS NZ App.

To download a chart or send waypoints, routes and tracks over your cellular Internet connection, Cellular Data in the Settings app must be ON.

  1. Go to the Home screen.
  2. Start the Settings app.
  3. Tap Cellular.
  4. Make sure the main switch for Cellular Data is ON.
  1. Scroll Down to iSailGPS NZ under USE CELLULAR DATA FOR: .
  2. Make sure its switch is ON.
  3. Go to the Home screen.
  4. Restart the iSailGPS NZ App.

Battery Life:

You can change several settings to reduce the iOS device's drain on its battery when you are using iSailGPS NZ on a long trip. Adjust the following settings:
  • Open the Settings app.
    • Tap Battery.
    • Turn on Low Power Mode.
If you don't have a cellular signal, or are willing to forgo cellular service to prolong battery life:
  • Open Control Center by swiping up from the bottom of any screen.
    • Turn on Airplane mode.
    • Turn down the screen brightness to the lowest acceptable level.
Otherwise:
  • Open Control Center by swiping up from the bottom of any screen.
    • Turn off Wi-Fi.
    • Turn off Bluetooth.
    • Turn down the screen brightness to the lowest acceptable level.
  • Open Apple’s Settings app.
    • Tap Cellular, then turn off Cellular Data. (Turn this back on if you need to download a chart.)
Also:
  • Plug the iOS device into a charger before your trip so that you start with a completely charged battery.
  • On the Track Screen, select  Always  when you start your trip. Put the iOS device to sleep when you are not looking at it. When you drop anchor or dock, on the Track Screen select  Off .
    (Don’t forget to turn Track Recording back on before resuming your trip.)

If you follow all the steps, you may be able to record tracks for about 10 to 12 hours of actual sailing. Use an external battery pack to extend this time.

Help Screen:

HOW TODO THIS
Retrace links you took Tap(backward)    or (forward).
Quickly jump to a Help section Tap .
Open the Settings app Tap .
Print these Help instructions
Tap(Share).   Tap  Print       .
Email your ideas or questions to us
Tap(Share).
Tap  Feedback and Support           .
Tell a friend about iSailGPS NZ
(This is really helpful for us, and we've
made it super quick and easy to do! )
Tap(Share).   Tap     or   .
Leave the Help screen Tap  Done 

We Listen to You:

Question or Suggestion?   lwjames@iSailGPS.com   00 + 1* 303 258 0576

Safety:

This iOS App must not be relied on as any part of a primary means of navigation. It must not be used in a way that safety or property depends on its successful operation. Always carry a compass and paper charts as a backup. The marine charts used in this app were last verified by LINZ on 7 December 2023. If your use requires that the information on the chart be more recent than 7/12/23, then don’t use iSailGPS NZ. Don’t run your battery down so far that you can’t make an emergency call if needed. James Associates Inc. accepts no liability, including incidental or consequential damages, for any injury or damages that may occur from the use of iSailGPS NZ.

For compliance with Maritime New Zealand requirements refer to Maritime Rules Part 25. The use of iSailGPS NZ does not relieve the user of their obligations under New Zealand law and international convention.

©2024 James Associates Inc.
iSailGPS.com/nz

  Company Info | Privacy Policy ©2024 James Associates Inc. All rights reserved.